How Can I set up Wavlink Extender?



Wavlink users are surfing the internet in dire hard need to know about the configuration process of extenders. Although setting up Wavlink extenders is not rocket science, still users are unable to make their devices up and running many times. If you are finding yourself in the same mess, we suggest you check the steps listed in this write-up and learn all about doing the Wavlink extender setup using wifi.wavlink.com. Let’s get started!

Steps to Set up Wavlink WiFi Extender

There are certain requirements to be fulfilled if you want to install your Wavlink extender without any hassle. You must have the following things handy:

  • An Ethernet Cable 
  • Your Wavlink Extender
  • Access to High-speed Internet
  • Power Adapter 
  • Default Web Address and Login Details 
Once you get access to all the above things, check the section below and learn how to set up a Wavlink WiFi extender.

Process to Manually Set up a Wavlink Extender

Get your Wavlink extender out of its box and ensure that all the parts of the device are available. Once done, you can start with the Wavlink setup process by going through the steps below:

  • Locate your Wavlink extender close to the router and plug it into a wall socket.
  • In a while, you will find that the LED lights of your device have turned on.
  • Now, connect the Wavlink extender to the host router. This is where you need to use the Ethernet cable that came along with the device.
  • Next, get access to your PC and open an internet browser on it.
  • Access wifi.wavlink.com web address by typing it into the address field of your browser.
  • The minute you press the Enter key, you will find yourself on the Wavlink login page.
  • Reaching here, you will be requested to enter the default login details.
  • Users who are not aware of the login details of their Wavlink extenders are advised to check the user manual.
  • Fill in the needed details carefully and proceed further with the Wavlink setup process.
  • The dashboard of your Wavlink extender will come into appearance.
  • Now, you need to look for the network name you want to expand and select the same.
  • Certain on-screen prompts will then be notifying you about doing the Wavlink setup.

So, follow the guidelines properly and get success with the Wavlink setup process.

Checkpoints While Doing Wavlink Setup

Users, at times, even after following the steps above are unable to complete the setup process of their extenders. If the same hurdle is coming your way, worry not.

We are going to jot down some checkpoints you need to refer to and proceed further accordingly.

  1. Update Your Internet Browser – No matter whether you are using wifi.wavlink.com or ap setup Wavlink web address, make sure the browser you are using for the process is up-to-date.

  2. Clean Your Web Browser – Updating the web browser is not enough! You need to clean it as well. This can be done by hovering over the settings and then selecting clean cache and cookies.

  3. Verify Cables – For getting Wavlink wifi extender setup success, you also need to confirm that the cable being used is not torn off from any point.

  4. Check Power Supply – Power plays an important role in the proper functioning of any electronic appliance. Thus, you need to ensure that the socket used for plugging the extender is working fine and supplying power without any fluctuations.

  5. Do Away with Interference – Interference from nearby appliances can also make you baffled while doing the Wavlink extender setup. So, you need to ensure that the extender is not placed near things like microwave ovens, refrigerators, Bluetooth speakers, baby monitors, etc.

  6. Confirm Login Details – Lastly, you are recommended to check the login details used for executing the Wavlink WiFi extender setup process. This is to inform you that the extender login details are case-sensitive. If you have not turned off the Caps Lock key while entering the details, getting Wavlink setup success is simply impossible.

Once you are through with checking all the steps above, try doing the Wavlink setup again and see if you can get success. We wish this time you would be able to make your range extender operational.  


أحدث أقدم