How to Manually Update Orbi Satellite?

Whether you are in the living room, in the kitchen or hanging out in the backyard, the Orbi system ensures that you have a reliable connection with no dead zones. Because of the satellites connected to the router.

Unlike conventional dual-band routers that only employ two bands (2.4 GHz and 5 GHz), the Orbi makes use of tri or dual-band technology—with an extra 5 GHz band for improved performance.

Netgear Orbi satellite promises a solid and ultra-fast quick internet connection is very vital when connected to the Orbi router to the internet devices.

But like routers, satellites have an in-built firmware, which you can update with the help of simple instructions given below:

Manually Update Orbi via Interface

To update with the help of the interface, you have to connect the computer with the Orbi satellite via cable or SSID.

  • Open a web browser on a device connected to your Orbi network (wired or wireless). Type orbilogin.com in the address bar and press Enter.
  • You might be asked to log in. Enter your Orbi router's username and password. If you haven't changed it, the default password is "password".
  • Once logged in, go to the Advanced tab. Look for Administration in the left-hand menu. Click on Firmware Update.
  • Choose Online Update and Manual Update. Click on the Manual Update tab.
  • Under the "Manual Update" section, you should see a list of connected devices, including your Orbi router and satellites.
  • Select the checkbox next to your Orbi satellite's model name. Click the Browse button. Locate the firmware file you downloaded earlier on your computer and select it. Click the Upload button.

The upload and update process will take a few minutes. Do not interrupt the process or power off the satellite or router during the update. You might see a progress bar or status messages. Once the satellite firmware is updated, the page might refresh, or you might see a confirmation message.

Go to the Status tab in the Orbi web interface. Look for the "Satellite" information and check the firmware version listed. Ensure it matches the version you just uploaded.

Manually Update Orbi via App

You can set the device firmware update on automatic from the Orbi app on your phone. Open the Orbi app and access it through the MyNetgear account.

1.      In the app, open the Settings and select the Firmware tab.

2.      Enable the Auto Update option and Orbi will automatically update itself from now on.

Troubleshooting Tips

Placement of Nodes

Position your main router (the one connected to your modem) in a central location in your home, ideally elevated and in an open space. This allows the initial signal to radiate outwards effectively.  

Minimize Network Load

Too many devices connected to a single node can strain its resources. If you have a large number of devices, distribute them reasonably across the different nodes in your network. For bandwidth-intensive devices like gaming consoles or streaming boxes, consider connecting them directly to a satellite via an Ethernet cable if available.

More other Solutions

1.      For the initial connection, keep the satellite relatively close to the router. You can move it to its final location after it has successfully synced.

2.      Walls and large metal objects can interfere with the Wi-Fi signal. Try to place the satellite in a location with minimal obstructions between it and the router.

3.      Pay attention to the color of the LED on the satellite as it provides important information about the connection status.

4.      Try restarting the devices or ensuring they are running the latest firmware. At last, reset the device if it is not working.

The Conclusion

Update your satellite will clear out all bugs from the devices, so its important to stay updated. From this article, you have learned how to update the satellite manually via two different methods: Orbi app and interface. Hopefully, you followed all instructions and tips to update the satellite in error free manner.

أحدث أقدم