Whether you are in the living room, in the kitchen or hanging out in the backyard, the Orbi system ensures that you have a reliable connection with no dead zones. Because of the satellites connected to the router.
Unlike conventional dual-band routers that only employ two
bands (2.4 GHz and 5 GHz), the Orbi makes use of tri or dual-band
technology—with an extra 5 GHz band for improved performance.
Netgear Orbi satellite promises a solid and ultra-fast quick
internet connection is very vital when connected to the Orbi router to the
internet devices.
But like routers, satellites have an in-built firmware,
which you can update with the help of simple instructions given below:
Manually Update Orbi via Interface
To update with the help of the interface, you have to connect
the computer with the Orbi satellite via cable or SSID.
- Open a
web browser on a device connected to your Orbi network (wired or
wireless). Type orbilogin.com
in the address bar and press Enter.
- You
might be asked to log in. Enter your Orbi router's username and password.
If you haven't changed it, the default password is "password".
- Once
logged in, go to the Advanced tab. Look for Administration in the
left-hand menu. Click on Firmware Update.
- Choose
Online Update and Manual Update. Click on the Manual Update tab.
- Under
the "Manual Update" section, you should see a list of connected
devices, including your Orbi router and satellites.
- Select
the checkbox next to your Orbi satellite's model name. Click the Browse
button. Locate the firmware file you downloaded earlier on your computer
and select it. Click the Upload button.
The upload and update process
will take a few minutes. Do not interrupt the process or power off the
satellite or router during the update. You might see a progress bar or status
messages. Once the satellite firmware is updated, the page might refresh, or
you might see a confirmation message.
Go to the Status tab in the Orbi web interface. Look for the
"Satellite" information and check the firmware version listed. Ensure
it matches the version you just uploaded.
Manually Update Orbi via App
You can set the device firmware update on automatic from the
Orbi app on your phone. Open the Orbi app and access it through the MyNetgear
account.
1.
In the app, open the Settings and select the
Firmware tab.
2.
Enable the Auto Update option and Orbi will
automatically update itself from now on.
Troubleshooting Tips
Placement of Nodes
Position your main router (the one connected to your modem)
in a central location in your home, ideally elevated and in an open space. This
allows the initial signal to radiate outwards effectively.
Minimize Network Load
Too many devices connected to a single node can strain its
resources. If you have a large number of devices, distribute them reasonably
across the different nodes in your network. For bandwidth-intensive devices
like gaming consoles or streaming boxes, consider connecting them directly to a
satellite via an Ethernet cable if available.
More other Solutions
1.
For the initial connection, keep the satellite
relatively close to the router. You can move it to its final location after it
has successfully synced.
2.
Walls and large metal objects can interfere with
the Wi-Fi signal. Try to place the satellite in a location with minimal
obstructions between it and the router.
3.
Pay attention to the color of the LED on the
satellite as it provides important information about the connection status.
4.
Try restarting the devices or ensuring they are
running the latest firmware. At last, reset the device if it is not working.
The Conclusion
Update your satellite will clear out all bugs from the
devices, so its important to stay updated. From this article, you have learned
how to update the satellite manually via two different methods: Orbi app and
interface. Hopefully, you followed all instructions and tips to update the
satellite in error free manner.