Many users have been reporting about facing issues while setting up their Netgear routers. Are you one among them? You do not have to get troubled any further since you are on the best post that comprises the best possible solutions for the issue that you are experiencing right now. A Netgear router can be set up using the Nighhtawk app or you can also do the Netgear Nighthawk setup without app. You use the web interface of the router to complete the setup process in the latter scenario. There is one more way which is known as the WPS button method.
You may be using any of these methods, we shall help you fix the problem in a jiffy.
How to Fix Netgear Router Setup Issues?
Use the Correct Steps
We hope you are using the correct steps to complete the setup of your Netgear router. You can always refer to the user manual that you got along with the router when you purchased it to know the correct setup steps. Use the same steps in the same sequence and you will be done setting up your router without any trouble.
Place the Devices Closer
When you are setting up your Netgear router, it is recommended to place the router closer to the modem since you need to make the connection between them. If the distance between the two devices is more then it becomes difficult for the devices to communicate with each other.
Connect Devices Properly
You can connect the Netgear Nighthawk router with the
modem using two ways. One is the wireless connection and the other one is by
using an Ethernet cable. We suggest you put to use an Ethernet cable at least
during the setup process. The reason being, a cable connection is much more
reliable than a wireless connection.
So you should use an Ethernet cable to join the LAN port of the modem to the Internet port on the Nighthawk router.
Use Updated Browser/App
You ought to use an updated internet browser to access
the setup page of the router to carry out the setup process. Go ahead and use
an upgraded browser or get the current browser updated to the recent version
and then go for setting up your router.
In case you are using the Netgear Nighthawk app
to
execute the setup task, then update the app by going to the Play Store or the App
Store.
Use the Right Login
Details
If you are using the web browser or Nighthawk app to get through the process, then you need to use the login details to complete the setup instructions. Make sure you are not making any spelling mistakes while inserting the username and password. Also, use the right web address or the IP address to reach the admin dashboard of the Netgear router.
Connect to the Correct
Network
The PC or the phone that you are using for setup must
be connected to the router’s network. We hope you are not committing the
mistake of using some other network to complete the process. If yes, then it is
not late even now. Go ahead and connect your device to the router’s network
either using a LAN cable or connect to its WiFi.
Wrap Up
This is all about how to fix the Netgear Nighthawk
router setup issues. If you can not complete the setup even now then reboot
your router as well as the modem once and then again connect them and try the
setup process.