Guide to Fix Linksys Extender Yellow Light Issue

Are the LEDs of your Linksys range extender flashing yellow? Do you experience the "Linksys extender yellow light" issue after you have completed the Linksys range extender setup procedure in a correct manner? Do not be concerned! This is a common issue encountered by two users of the extender. We have jotted down the best solutions, following the rule that troubleshooting "Linksys extender yellow light" problem will be as simple as counting to 123. Let's start!

Linksys Extender Yellow Light Issue


Resolve the Linksys Extender Yellow Light Problem

Reboot Your Linksys Extender

Tech glitches are likely to cause you to encounter the "Linksys extender yellow light" problem. No worries! Our solution is for you and will help you get rid of any technical issues, i.e. rebooting your Linksys extender. Here's how to accomplish this using a simple method:

Step 1. First switch off the Linksys range extender and disconnect it from the outlet.

Step 2: After disconnecting the extender, let it rest for several seconds.

Step 3. Connect the Linksys range extender to the wall outlet. It should be turned on.

Step 4 Join your device to the router by using the Ethernet source.

Let's hope that after restarting the Linksys range extender and resetting it, the problem you're experiencing is now resolved. If not, do not think about trying the next method that is listed below.

Update the Linksys Extender Firmware

Each Linksys range extender is equipped with an updated firmware version. I hope yours came with the same feature? If so, we recommend that you update it promptly. It is because of the outdated firmware version, which is the primary reason for getting the "Linksys extender yellow light" problem. Thus, make sure you update it right away via extender.linksys.com.

Examine the Ethernet Connection

The final tip you should implement to eliminate the "Linksys extender yellow light" issue is to test the Ethernet cable that you've used to connect the Linksys range extender to your router. You're sure the cable isn't damaged or worn out, is it? If so, then we suggest replacing it as soon as possible. Also, make sure that your Ethernet connectivity between your Linksys range extender and your router isn't loose.

Check the Power Supply

It is likely that the outlet that you plug into the wall outlet that you have plugged your Linksys range extender into is damaged or fluctuating. To quickly resolve the problem, you must either repair the wall outlet or connect the Linksys range extender to a different functional socket.

Prevent Signal Interference

Another important thing is that a good way to rid yourself of the "Linksys extender yellow light" problem is to protect it from interference by WiFi. Consider the following points in consideration when you place your range extender with Linksys

  • within reach of your current router. Keep in mind that the WiFi signals from your router are required for the Linksys Range extender to function properly.
  • Don't place your extender within the reach of Alexa or WiFi devices.
  • Keep it out of windows, walls that are thick, doors, and security alarms.
  • Be sure to avoid placing the extender next to the kitchen and gym.
  • Don't place gaming consoles, baby monitors, playstations, etc. within the reach of your Linksys range extender.
  • Avoid hiding your Linksys range extender inside a cabinet. Don't keep your extender in an area, under a table, on the back of any gadget, etc.

As per the above points, do we think that you have the solution to the "Linksys extender yellow light" problem?

Reset your Linksys Range Extender

What if none of these hacks to troubleshoot can help you solve the "Linksys extender yellow light" problem? If the answer is yes, you should consider a factory reset.

Here's how to reset your Linksys range extender's settings to factory defaults.

Step 1: Don't disconnect the device from Linksys. However, disconnect the extension and router OK?

Step 2: Locate the reset hole on the back of your Linksys Range extender.

Step 3: Grab an object like a paper clip or any other sharp object that you can press down on and hold onto the Linksys Range extender's reset holes.

Step 4: Sit for a couple of minutes.

Step 5: Let it go.

Step 6: Reconnect both devices i.e. extender and router.

Once your Linksys range extender procedure is completed After that, you can repeat the Linksys range extender set-up procedure again with standard Linksys extended login details.

Wrapping Up

Now, we're going to conclude this post with the wish that these hacks can help you solve the "Linksys extender yellow light" issue , won't they?

Previous Post Next Post